D-Link DBA-1510P, Быстрое руководство по установке

Страница: 3 / 6

3
E
N
G
LI
S
H
Bottom
ƒ
Power Receptor
ƒ
LAN Port (PoE)
ƒ
Serial Console Port
Front
ƒ
Kensington Security Slot
ƒ
Reset Button
Press the Reset Button between 2 to 5
seconds to restart the device.
Press the Reset Button between 6 to 15
seconds to restore the device to its factory
default settings.
Press the Reset Button more than 15 seconds
to restore the device to its factory default
settings and also force the loading of alternate
firmware.
Installation
Step 1 – Powering The Device
To power on the DBA-1510P, you can use one
of the two following methods:
1. Connect the supplied power adapter
2. Plug one end of your Ethernet cable into
the LAN port of the DBA-1510P, and the
other end into a port on a Power over
Ethernet enabled switch.
Step 2 – Configure The Device
The easiest way to configure the DBA-1510P
is to connect the DBA-1510P to the Internet
through a switch or router. Connect your
computer to the Internet and manage the
DBA-1510P via D-Link Business Cloud.
The DBA-1510P will automatically connect
to the D-Link Business Cloud, download its
configuration, and join the appropriate network.
If you are unable to connect the DBA-1510P to
the D-Link Business Cloud through the Internet
due to your networking configuration you will
need to manually configure the DBA-1510P
using one of the following options.
1. Connect the DBA-1510P and your
computer directly via a straight-through
Ethernet cable. You can then manage the
access point from your computer using the
following steps.
Enter the DBA-1510P hostname in the
address field of your browser and then
press Enter . The default hostname is
“DBA-1510P-XXXX” where XXXX is the
last 4 digits of the MAC address listed on
the device label located on the bottom of
the device.
Log in to the administration web pages. The
default login information is:
Username: admin
Password: admin
2. Connect the DBA-1510P and your
computer to the same switch or router. You
can then manage the access point from
your computer using the following steps.
Enter the DBA-1510P hostname in the
address field of your browser and then
press Enter . The default hostname is
D-Link DBA-1510P Quick Install Guide 6
E
N
G
LI
S
H
Switch or Router Switch or Router
Switch or Router
Management
Management
DBA-1510P
DBA-1510P
DBA-1510P
DBA-1510P
Management
Management
D-Link Business Cloud
D-Link DBA-1510P Quick Install Guide
6
E
N
G
LI
S
H
Switch or Router Switch or Router
Switch or Router
Management
Management
DBA-1510P
DBA-1510P
DBA-1510P
DBA-1510P
Management
Management
D-Link Business Cloud