D-Link DAP-3662 Скачать руководство пользователя

Страница: 31 / 94

D-Link DAP-3662 User Manual

Section 3 - Configuration

DTIM Interval (1-15):

Transmit Power:

WMM (Wi-Fi

Multimedia):

Ack Time Out (2.4

GHZ) or Ack Time Out

(5 GHZ):

Short GI:

IGMP Snooping:

Multicast Rate:

Multicast Bandwidth

Control :

Maximum Multicast

Bandwidth :

HT20/40 Coexistence :

Transfer DHCP Offer to

Unicast :

Select a Delivery Traffic Indication Message setting between

and

is the default setting. DTIM is a countdown informing

clients of the next window for listening to broadcast and multicast messages.

This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate overlapping

of wireless area coverage between two access points where interference is a major concern. For example, if wireless coverage

is intended for half of the area, then select 50% as the option. Use the drop-down menu to select

100%

50%

25%

, or

12.5%

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications over

a Wi-Fi network.

To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between

and

200

microseconds for 5 GHz or from

200

microseconds in the 2.4 GHz in the field provided.

Select

Enable

Disable

. Enabling a short guard interval can increase throughput. However, be aware that it can also increase

the error rate in some installations due to increased sensitivity to radio-frequency installations.

Select

Enable

Disable

. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent

between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to an

IGMP host based on IGMP messages passing through the AP.

Adjust the multicast packet data rate here. The multicast rate is supported in

AP mode

, (2.4 GHZ and 5 GHZ) and

WDS

with AP

mode

, including Multi-SSIDs.

Adjust the multicast packet data rate here. The multicast rate is supported in AP mode, and WDS with AP mode, including Multi-

SSIDs

Set the multicast packets maximum bandwidth pass through rate from the Ethernet interface to the DAP-3662.

Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40 MHz

and there is another wireless network’s channel over-lapping and causing interference, the DAP-3662 will automatically change

to 20 MHz.

Enable to transfer the DHCP Offer to Unicast from LAN to WLAN, suggest to enable this function if stations number is larger than 30.

Содержание DAP-3662































































































Результаты поиска

Содержание DAP-3662

Отзывы:

Похожие инструкции для DAP-3662

Бренды по названию

Популярные бренды

D-Link DAP-3662, Руководство пользователя

Результаты поиска

Содержание DAP-3662

Отзывы:

Похожие инструкции для DAP-3662

Бренды по названию

Популярные бренды