D-Link DAP-3220 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 69

background image

30

DAP-3220 User’s Manual

D-Link Wireless 108G Exterior Access Point

Using the Configuration Menu

WMM:

Select Enable or Disable, Disable is selected by default. WMM
stands for Wi-Fi Multimedia, by enabling this feature it will improve
the user experience for audio and video applications over a Wi-Fi
network.

Preamble:

Select the default value Short and Long, or Long Only.

RTS Length:

Transmit Power:

This value should remain at its default setting of 2346. If you

encounter inconsistent data flow, only minor modifications to the

value range between 256 and 2346 are recommended.

Choose from full, half (-3dB), quarter (-6dB), eighth (-9dB), and

minimum power.

Wireless B/G Mode:

This function allows you to configure the wireless network with

IEEE 802.11g, IEEE 802.11b, or IEEE 802.11g with backward
interoperability with IEEE 802.11b.

IGMP Snooping:

Internet Group Management Protocol (IGMP) snooping allows the

AP to recognize IGMP queries and reports sent between routers

and an IGMP host (wireless STA). When enabled IGMP snooping,

the AP will forward multicast packets to IGMP host based on IGMP
messages passing through the AP.

The fragmentation threshold, which is specified in bytes, determines

whether packets will be fragmented. Packets exceeding the setting
of 2346 bytes will be fragmented before transmission. 2346 is the
default setting.

Fragment Length:

Super G Mode:

Super G is a set of performance enhancement features that
increase end user application throughput in an 802.11g network,
and is backwards compatible with standard 802.11g devices. For
top performance, all wireless devices on the network should be
Super G capable. Select either Disabled, Super G without Turbo,
or Super G with Dynamic Turbo.

Disabled:

Super G

without

Turbo:

Capable of packet bursting, FastFrames, and compres-
sion mode.

Super

G with

Dynamic

Turbo:

Capable of packet bursting, FastFrames, compression,
and Dynamic Turbo. This setting is backwards compat-

ible with non-Turbo (legacy) devices. Dynamic Turbo

mode is only enabled when all devices on the wireless

network are configured with Super G and have Dynamic

Turbo enabled.

Select On or Off.

Standard 802.11g support, no enhanced capabilities.

Wireless:

«
...
28
29
30
31
32
...
»

Содержание DAP-3220






































































Отзывы:

Нет отзывов

Похожие инструкции для DAP-3220

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 2

WG602v3 - Wireless Access Point

Бренд: NETGEAR Страницы: 2

Бренд: Gainstrong Страницы: 14

Бренд: Ebyte Страницы: 10

Bridge/Router G-2000s

Бренд: ZyXEL Communications Страницы: 22

Бренд: TRENDnet Страницы: 93

cnPilot E410 Indoor

Бренд: Cambium Networks Страницы: 52

7000AP - Air Xpert - Wireless Access Point

Бренд: D-Link Страницы: 8

Бренд: Linksys Страницы: 30

Бренд: Linksys Страницы: 31

Бренд: Linksys Страницы: 135

Бренд: Billion Страницы: 2

Бренд: SendFar Страницы: 29

Бренд: Zte Страницы: 17

AirGuard 3e-525C-2

Бренд: 3e Technologies International Страницы: 80

Бренд: 3e Technologies International Страницы: 104

Бренд: 3e Technologies International Страницы: 109

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды