21
D-Link DAP-1900 User Manual
Section 3 - Configuration
Access Point Mode Settings
This page lets you configure the DAP-1900 as an access point. Connect an Ethernet cable from your router’s LAN port to the LAN
port of the DAP-1900.
To access this page, click
Settings
at the top of the page, then select
Extender
. Click
Save
to apply the settings when you are done
with your changes.
Under Existing Network, choose
Ethernet
to utilize the DAP-1900 as an access point. Refer to “Extender Settings” on page 26 for
more information regarding configuration options.