39
D-Link DAP-1620 User Manual
Section 3 - Configuration
IPv6 -
Autoconfiguration (SLAAC/DHCPv6)
My Internet
Connection is
Obtain a DNS
server address
automatically
Primary DNS
Server
Secondary DNS
Server
Select
Autoconfiguration (SLAAC/DHCPv6)
to have the DAP-1620
automatically receive an IPv6 address from the uplink router.
You can select to obtain IPv6 DNS server information automatically,
or you can select to configure DNS servers manually by selecting
next to the option
Use the following DNS address
.
For manual settings, enter the primary IPv6 DNS server address.
For manual settings, enter the secondary IPv6 DNS server address.
This is optional but will provide backup if the primary server fails.
IPv6 -
Static IPv6
My Internet
Connection is
IPv6 Address
Subnet Prefix
Length
Default Gateway
Primary DNS
Server
Secondary DNS
Server
Select
Static IPv6
to manually assign an IP address to the DAP-1620.
Enter the IPv6 address that you want to assign to the extended
network AP. This address should be outside of the uplink router’s
DHCP address pool.
Enter the length of the IPv6 subnet prefix.
Enter the default gateway.
Enter the primary IPv6 DNS server address.
Enter the secondary IPv6 DNS server address. This is optional but
will provide backup if the primary server fails.
IPv6 -
Local Connectivity Only
My Internet
Connection is
LAN IPv6 Link-
Local Address
Select
Local Connectivity Only
to set an IPv6 address only for the
local network.
The link-local address of the DAP-1620.
