D-Link DAP-1533 Скачать руководство пользователя страница 8

Страница: 8 / 99

D-Link DAP-1533 User Manual

Section 1 - Product Overview

•.Faster.Wireless.Networking.-

The DAP-1533 provides up to 450Mbps* wireless connection with other 802.11n wireless

clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming,

and real-time audio. The performance of this 802.11n wireless access point gives you the freedom of wireless networking

at speeds 13x faster than 802.11g.

•.Compatible.with.802.11a.and.802.11g.Devices.-

The DAP-1533 is still fully compatible with the IEEE 802.11a/g

standard, so it can connect with existing 802.11a/g PCI, USB, and Cardbus adapters.

•.WPS.PBC-.

(Wi-Fi Protected Setup Push Button Configuration) Push Button Configuration is a button that can be pressed

to add the device to an existing network or to create a new network. A virtual button can be used on the utility while

a physical button is placed on the side of the device.

This easy setup method allows you to form a secured wireless link between the DAP-1533 and another WPS-enabled

device. A PC is no longer needed to log into the Web-based interface.

•.Share.Multifunction.Printers.and.3G.Mobile.Internet.Connection.-.

Through the SharePort™ Plus Utility, you can

connect multifunction printers to the USB ports to share printing and scanning functions among family members.

•.User-friendly.Setup.Wizard.-.

Through its easy-to-use Web-based user interface, the DAP-1533 lets you control what

information is accessible to those on the wireless network, whether from the Internet or from your company’s server.

Configure your access point to your specific settings within minutes.

Features

Содержание DAP-1533




































































































Результаты поиска

Содержание DAP-1533

Отзывы:

Похожие инструкции для DAP-1533

Бренды по названию

Популярные бренды

D-Link DAP-1533, Руководство пользователя

Результаты поиска

Содержание DAP-1533

Отзывы:

Похожие инструкции для DAP-1533

Бренды по названию

Популярные бренды