![background image](http://html.mh-extra.com/html/d-link/dap-1350/dap-1350_user-manual_78361108.webp)
10
D-Link DAP-1350 User Manual
Section - Security
Configure WEP
It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please
establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption
due to the added overhead.
1. Log into the web-based configuration by opening a web
browser and entering the IP address of the access point
(192.168.0.50). Click on
Setup
and then click
Wireless
Settings
on the left side.
2. Next to Security Mode in the Wireless Security Mode
section, select
Enable WEP Wireless Security (Basic)
.
3. Next to
Authentication
, select
Open
or
Shared Key
.
4. Next to
WEP Encryption
, select
64-bit
or
128-bit
encryption.
5. Next to
Key Type
, select either
Hex
or
ASCII
.
Hex (recommended) - Letters A-F and numbers 0-9 are valid.
ASCII - All numbers and letters are valid.
6. Next to Key 1, enter a WEP key that you create. Make sure
you enter this key exactly on all your wireless devices. You
may enter up to 4 different keys.
7. Click
Save Settings
at the top of the window to save your settings. If you are configuring the access point with a
wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as
you did on the access point.
Содержание DAP-1350
Страница 1: ......
Страница 42: ...42 D Link DAP 1350 User Manual Section 3 Configuration Help ...
Страница 60: ...60 D Link DAP 1350 User Manual Section 3 Configuration Help ...
Страница 105: ...105 D Link DAP 1350 User Manual Section 3 Configuration Help ...