D-Link DAP-1260L, Руководство пользователя

Страница: 35 / 103

35 D-Link DAP-1260L User Manual
Section 3 - Configuration
Enable Wireless:
Wireless Mode:
Wireless
Network Name:
802.11 Mode:
Wireless
Channel:
Enable Auto
Channel Scan:
Channel
Width:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions. You may also set up a specific time
range (schedule). Select a schedule from the drop-down
menu or click
Add.New
to create a new schedule.
Select
Access.Point
from the drop-down menu.
When you are browsing for available wireless networks,
this is the name that will appear in the list (unless Visibility
Status is set to Invisible, see below). This name is also
referred to as the SSID. For security purposes, it is highly
recommended to change from the default network name.
Select one of the following:
802.11n.Only
- Select if you are only using 802.11n
wireless clients.
Mixed.802.11n.and.802.11g
- Select if you are using a
mix of 802.11n and 11g wireless clients.
Mixed.802.11n,.802.11g.and.802.11b
- Select if you are
using a mix of 802.11n, 11g, and 11b wireless clients.
Indicates the channel setting for the DAP-1260L. The Channel can be changed to fit the channel setting for an existing wireless
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
The
Auto.Channel.Scan
setting can be selected to allow the DAP-1260L to choose the channel with the least amount of interference.
Select the Channel Width:
Auto.20/40
- Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz
- Select if you are not using any 802.11n wireless clients.
Access Point Mode