D-Link D DPH-50U DPH-50U, Быстрая установка

Страница: 10 / 12

10 D-Link DPH-50U Quick Install Guide
You can continue to use the telephone handset connected to the
DPH-50U Skype USB Phone Adapter to make and receive standard
telephone calls as you used without any change. To make a standard
phone call, just pick up the handset and dial as you normally would. Make
sure you hear a dial tone before you dial ## or the phone number. To
answer (receive) a standard phone call just pick up the handset when the
phone rings.
When you receive an incoming Skype
™
call, the handset connected to the
DPH-50U will ring. To answer the call, just pick up the handset and speak
as you normally would. To end the call, simply hang up the handset as you
normally would.
If you have SkypeOut
™
, you can use the DPH-50U connected handset to
make SkypeOut
™
calls by picking up the handset, pressing ## (only if the
DHP-50U is in PSTN mode), to indicate to the DPH-50U that this will be a
Skype call, dialing as per the SkypeOut
™
recommended dialing sequence,
00 + country code + telephone number and pressing the asterisk (*) key. If
the DPH-50U is already in VoIP mode, pressing ## is not required.
Examples:
PSTN mode:
## 001 617 555 1212 *
VoIP mode: 001 617 555 1212 *
In order to make a call to a Skype
™
contact, you will need to use the Skype
™
program to assign a speed dial (as described in the user manual) to each
person you would like to call from the DPH-50U connected handset. Then
simply pick up the handset, press ## (if in PSTN mode), to indicate to the
DPH-50U that this is a Skype call, you will hear a new dial-tone, press the
speed dial number (e.g. 22) and then press the asterisk (*) key.
Making and Receiving Calls