D-Link D DI-707P DI-707P Скачать руководство пользователя страница 2

2

Connecting The DI-707P Broadband
Router To Your Network

 

B. 

WAN Port

This is for the connection

of an Ethernet cable to the

Cable or DSL modem

C. 

LAN Ports

  These

are the connections

for Ethernet cables to

Ethernet enabled

computers.

D.  

Printer Port

 You

can connect a

Printer to the

Parallel Port here.

 A.

First, connect the power adapter to the 

receptor

 at the back panel of the

DI-707P and then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn 

ON

 to indicate proper operation.

 B.

1. Power off your Cable or DSL modem; some devices may not have a on/off
switch and will require you to unplug the power adapter. Now, the DI-707P
should be powered on and the Cable / DSL modem should be turned off.

2. Cable / DSL modem (

Power Off

) – DI-707P (

Power On

)

Connect an Ethernet cable to the Ethernet jack located on the Cable / DSL
modem. After the Ethernet cable is securely connected, power on the Cable /
DSL modem by turning on the unit or plugging in the power adapter.

3. Cable / DSL modem (

Power On

) – DI-707P (

Power On

)

Insert the other end of the Ethernet cable to the WAN PORT on the back panel
of the DI-707P. The WAN LED light will illuminate to indicate proper connection.
If the WAN LED is not illuminated, please go back to step B1 and repeat the
instructions.

 C.

Insert an Ethernet cable to 

LAN port 1

 on the back panel of the 

DI-707P and an

available Ethernet port on the network adapter in the computer you will use to
configure the DI-707P. The LED light for LAN Port 1 will illuminate to indicate
proper connection. (Note: The LAN Ports on the DI-707P are Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to the LAN
Ports.)

 D.

The parallel port on the DI-707P is used to connect printers only.  Connect one
end of the printer cable to your printer and the other end to the DI-707P.

Reset Button

 

Pressing this button restores

the Router to its original factory

default settings.

A. 

Receptor for

Power Adapter

.

Содержание D DI-707P DI-707P

















Отзывы: