
10
D-Link COVR-X1870 || COVR-X1872 || COVR-X1873 || COVR-X1874 User Manual
Section 2 - Installation
Web Based Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up your Covr device and configure your Covr Wi-Fi network
using the web-based user interface.
Step 1
Position the Covr Point close to your Internet-connected modem and
connect an Ethernet cable to the modem and to INTERNET Port of the Covr
Point. Next, connect the power adapter and plug the Covr Point into a power
outlet.
Step 2
Wait for the Covr Point to boot up. When the COVR LED starts blinking
orange, wirelessly connect your computer to the Wi-Fi name (SSID) printed
on the bottom of the device, or on the included Quick Install Card.
Your Covr device is now set up and ready to use. You can now configure your Covr Wi-Fi settings using the free D-Link Wi-Fi
mobile app or the web-based user interface. Refer to the
Configuration
section on page
for more information on
configuring your network using the web-based user interface.
http://covr.local./
Step 3
Type
http://covr.local./
into a web browser and follow the on-screen
instructions to complete the setup.
MODEM
Wi-Fi
Wi-Fi
SSID:
Password:
W
P
S
QUICK INSTALL CARD