D-Link AX1500, Обзор продукта

Страница: 79 / 175

74 D-Link R15 User Manual
Section 3 - Configuration
If you click Edit or Add Rule , the following options will appear:
Name
Enter a name for the rule.
Source IP Address
Range
Enter the source IP address range (e.g. 1.1.1.1-1.1.1.2 for IPv4
or 2001::1-2001::2 for IPv6) that the rule will apply to. Using
the drop-down menu, specify whether it is a
WAN
or
LAN
IP
address. Both a single IP address and a range of IP addresses
can be entered.
Destination IP Address
Range
Enter the destination IP address range (e.g. 1.1.1.1-1.1.1.2
for IPv4 or 2001::1-2001::2 for IPv6) that the rule will apply
to. Using the drop-down menu, specify whether it is a
WAN
or
LAN
IP address. Both a single IP address and a range of IP
addresses can be entered.
Protocol & Port Range
Select the protocol of the traffic to allow or deny (
Any, TCP, or
UDP
) and then enter the range of ports (e.g. 21-23) that the
rule will apply to. Select Any to allow/deny all types of traffic
regardless of the port number.
Schedule
Use the drop-down menu to select the time schedule for the
rule. The schedule may be set to Always Enable , or you can
create your own schedules in the
Schedules
section. Refer to
Management > Time & Schedule - Schedule on page 85
for more information.
A maximum of 24 rules can be defined.