D-Link AirPro DI-754, Быстрое руководство по установке

Страница: 4 / 16

Connecting Additional Computers To
The DI-754
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-754
M1 LED – a solid
light indicates
that the DI-754 is
ready.
Power LED – a solid
light indicates a
proper connection to
the power supply
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Local Network LEDs
– a solid light on the
port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
11a/11b Wireless
LEDs
– a solid light
indicates that the
wireless segment is
ready. These LEDs
blink during wireless
data transmission.
M2 LED – A solid light
indicates that the unit is
defective.