When you enter a command without a variable or value that needs to be specified, the CLI will prompt you
with further information about what is needed to complete the command.
For example, if you type in
snmp delcomm
, the missing value,
CommunityString<string>
, is displayed in
order so that you can complete the instruction.
Commands and their Descriptions
Utility Commands
help
Display CLI Command List
ping
Send ICMP ECHO_REQUEST to network hosts
set factorydefault
Restore to factory default setting
reboot
Reboot Access Point. It is necessary to reboot the AP after
making Configuration changes for those changes to take effect.
ssl freset
Use freset to factorydefault
get bootcodeinfo
Display bootcode information
version
Displays the currently loaded firmware version
get cpuinfo
Display cpu info percentage
get meminfo
Display mem info percentage
get hardware
Display Hardware Revisions
get macaddress
Display Mac address
get country
Display Country
get pingctl
Display Ping Control state
get inact
Display the value of a specific inact
set pingctl
Set Ping Control
get uptime
Display UpTime
get time
Display time
pwd
Print name of current/working directory
