15
Wireless Mode:
Authentication:
Keys 1-4:
Select the default key.
IP Settings:
Click on the pull-down menu; select from the
following options:
Infrastructure
- Connecting to the WLAN
using an access point. (This is the
default
setting).
Ad-Hoc –
Wireless mode used when
connecting directly to a computer equipped
with a wireless adapter in a Peer-to-Peer
environment.
Choose one of the following modes:
Click
Apply
to save changes.
When you click
IP Settings
in the Configuration window, the pop-up screen
shown on the next page will appear. Configure the IP settings in that window.
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F.
ASCII
(American Standard Code for Information Interchange)
is a code for
representing English letters as numbers from 0-127.
Using the Configuration Utility
(continued)
Configuration
Open Authentication
- The DWL-AG530 is visible to all devices on the
network.
Shared Authentication
- Allows communication only with other devices
with identical WEP settings.
WPA*
- Select to enable WPA. Click
Athentication Config
.
WPA-PSK* -
Select to enable WPA-PSK. Click
Authentication Config
.
*(See the following pages for more detailed configuration instructions.)
IEEE802.1x:
Enable 802.1x in this field.
(802.1x is automatically enabled when
WPA
or
WPA-PSK
is selected.)
SSID:
Service Set Identifier is a name that identifies
a wireless network. Access points and wireless
devices attempting to connect to a specific
WLAN must use the same SSID.
Key Length:
Select the key length and either ASCII or hexadecimal format.
Data Encryption:
Select
Enabled
or
Disabled.