13
Link Info
Using the Configuration Utility
(continued)
After clicking on the Configuration Utility icon, the
Link Info
screen will display the
settings for the DWL-G6
8
0:
SSID:
The Service Set Identifier is the name
assigned to the wireless network.
The factory SSID setting is
default
.
Tx Rate:
Tx Rate settings are automatically determined for an optimal speed up to a maximum
of 54Mbps.
Status:
Displays the MAC address of the
access point or router to which the
DWL-G6
8
0 is associated.
Channel:
The channel selection is automatically determined by the DWL-G6
8
0.
Frequency:
802.11g indicates that the DWL-
G650 is communicating in the
2.4GHz band.
Encryption:
You can see if WEP (Wired Equivalent Privacy) is
Enabled
or
Disabled
here.
Wireless Mode:
Either
Infrastructure
or
Ad-Hoc
will be displayed here. (Please see the
Getting
Started
section in this manual for an explanation of these two modes.)
Signal Strength/Link Quality:
Packet Count:
Displays the statistics of the data packets that are transmitted and received.
Rescan Button:
Rescans for the strongest signal in your environment and associates with that access
point or router.
Displays the Link Quality for the DWL-G6
8
0 wireless connection to the access point.
The signal strength represents the wireless signal between the access point and the
DWL-G6
8
0. The percentage coincides with the graphical bar.
Air
Plus Xtreme G Wireless Utility
802.11g
11
