20
Web Configuration
WEP Key to Use:
Use the pull-down menu to select the WEP key. All
devices on the network must use the same key to communicate with one
another.
Please be careful when entering WEP values, any input error
will result in a communication failure.
Deny Unencrypted Data: By default, this item is not selected.
For
additional security when WEP is enabled,
select
Deny Unencrypted Data.
Data received without a WEP key is rejected when
Deny Unencrypted Data
is selected.
Shared Key Authentication: By default, this is not selected.
If you
would like to include a WEP check before allowing connection on the
network, select this item. If it remains unselected, only the SSID will be
checked before authorizing connection.
Click
Apply
to update the settings. Click
Cancel
to discard any changes
you have made. Changes will only take effect after you restart the DWL-810.
To restart, click on
Admin
in the system tool bar. Click
Reboot
in the Admin
window.
IP Address
Click on
IP
Address
in the
menu. The
default settings
are displayed.
To change the
settings, input
information into
the following
fields:
Static:
Select
Static (recommended)
to assign the IP Address, the Subnet Mask and the
Gateway Address of the DWL-810.
DHCP:
Select DHCP if a DHCP-capable router on the network will assign
an IP Address to the DWL-810.
(This is not recommended because a
DHCP-assigned IP Address will change frequently, making the
DWL-810 impossible to configure.)
Fig. 6.5
