J.
TxRate:
You can
adjust the transmis-
sion rate to get the
best signal possible
depending on your
usage and environ-
ment.
L.
Power Mode:
By
default, Power Mode is
set to Continuous
Access Mode.
Continu-
ous Access Mode
- this
default setting con-
sumes the most power.
Maximum Power Save
-
this setting consumes
the lease power.
Power
Save
- this setting
consumes a moderate
amount of power.
K.
Preamble:
By default, D-Link
AirPlus Products are set to
Long
Preamble
. The Preamble
defines the length of the CRC
block (Cyclic Redundancy
Check is a common technique
for detecting data transmission
errors) for communication
between the Access Point and
wireless network adapters.
High network traffic areas shout
use the Shorter Preamble type.
G
L
K
J
I
H
H.
Wireless Mode:
The factory
setting is set to
Infrastruc-
ture
Mode. Ad-Hoc mode is
used for peer-to-peer net-
working.
Appendix (cont.)
I.
Channel:
By Default, the
channel is set to 6. Channel
selection is automatically
determined by the DWL-
120+ depending on the
channel setting of the
access point selected for
association. To change the
channel settings, the
Wireless Mode must be set
to Ad-Hoc.
B.
SSID
:
The Service
Set Identifier is the
name assigned to
the wireless network.
The factory SSID
setting is set to
default.