Restart Your Computer
Connecting Additional Computers To
The DI-714P+
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-714P+
M1 LED
– a solid
light indicates
that the DI-714P+
is ready.
M2 LED
– A solid light indicates
that the unit is defective.
WLAN LED
– a solid
light indicates that the
wireless segment is
ready. This LED blinks
during wireless data
transmission.
WAN LED
– a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs
– a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
POWER LED
– a solid
light indicates a proper
connection to the
power supply.
