![D-Link Air Xpert DWL-AG650 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/d-link/air-xpert-dwl-ag650/air-xpert-dwl-ag650_manual_73883015.webp)
15
SSID -
(Service Set Identifier) is a name that identifies a wireless network. Access
Points and wireless clients attempting to connect to a specific WLAN (Wireless Local
Area Network) must use the same SSID. The default setting is
default
.
Wireless Mode
- Click on the pull-down menu; select from the following options:
Infrastructure
- connecting the WLAN using an Access Point. (The
default
setting).
Ad-Hoc –
wireless mode used when connecting directly to a computer equipped
with a wireless adapter in a peer-to-peer environment.
Ad-Hoc Band -
If you have selected Ad-Hoc Wireless mode, select the standard for
your Ad-Hoc communication: 11,11A,11B, or 11G
Channel –
The
default
channel setting is channel
Auto.
The DWL-AG650 will
automatically select the channel to match the channel setting for the selected Access
Point. In Ad-Hoc mode, the channel must be manually set to the same channel for
each wireless adapter.
TX Rate (11B/G)
- Select the transmission rate on the 802.11B/G network.
Auto
is
the
default
setting. TX rates are automatically determined by the DWL-AG650
depending on the distance from the access point.
TX Rate (11A)
- Select the transmission rate on the 802.11A network.
Auto
is the
default
setting.
Power Mode
– Select from three modes:
Continuous Access Mode-
this
default
setting consumes the most power
Maximum Power Save
-this setting consumes the least power
Power Save-
this setting consumes a moderate amount of power
If any changes are made to the configuration of the wireless adapter, click
Apply
to save the changes.
Configuration Utility
D-Link
Air
Plus DWL-650+ 2.4GHz Wireless Cardbus Adapter
Configuration
Support Band
Preamble
-
Auto
is the default setting. The Preamble defines the length of the CRC
block (Cyclic Redundancy Check is a common technique for detecting data
transmission errors) for communication between the Access Point and the wireless
Network adapters.
Note: High network traffic areas should use the shorter preamble
type.
By default, all boxes are
checked. Make sure that the
boxes are checked that corre-
spond to the networks to which
you wish to view and/or connect.
You may keep all the boxes se-
lected as shown if you wish.