D-Link Air Xpert DWL-AG520, Руководство пользователя

Страница: 16 / 53

16
Configuration Utility
Advanced
Frequency - Select the Frequency here. Auto is the default setting.
Starting Ad-Hoc Network – Each wireless adapter communicating in
Turbo Mode - To enable Turbo mode , all devices must have the same setting
,
Ad-Hoc mode
must have the same setting here.
Ad-Hoc Channel - All devices in the Ad-Hoc network must have the same channel
Encryption Type – Select the Encryption type
Profile IP Settings -You can Enable or Disable the IP Settings portion of your
profile here. If you select Disable you will need to configure the IP Address
information each time you connect to a network. If you select Enable you will
maintain the same IP Address information that you have configured each time you
connect to a network.
Launch Utility on Startup – Select Enable or Disable
Data Packet Parameter - Select the parameters here
Fragmentation Threshold - This value should remain at its default setting of 2346.
If you experience a high packet error rate, you may slightly increase your
Fragmentation Threshold within the value range of 256 to 2,346. Setting the
Fragmentation Threshold too low may result in poor performance.
RTS Threshold - This value should remain at its default setting of 2346. If
inconsistent data flow is a problem, only a minor modification should be made.