Getting Started
Setting up a Wireless Ad Hoc Network
Install a network adapter into one computer. In the example
above, a
D-Link
Air
DWL-120
USB Wireless Network adapter is
installed. A
DWL-520
Wireless PCI Adapter could also be
installed in a desktop computer.
See the
Quick Installation Guide
included with the product for installation instructions.
Install a wireless cardbus adapter (such as the
DWL-650
) into a
laptop computer.
See the
Quick Installation Guide
included with the
network adapter.
Set the wireless configuration for the adapters to
Ad-Hoc mode, set the adapters to the same channel, and assign
an IP Address to each computer on the Ad-Hoc network. (See
box below.)
Install and configure the DCF-660W.
See the
Quick Installation
Guide
included with the product.
Install the
D-Link
Air
DCF-660W
into your PDA
.
See the
Quick
Installation Guide
included with the DCF-660W. In all the above
installations, the LEDs will light ON to show
connection.
