D-Link AC1200, Быстрое руководство по установке

Страница: 3 / 16

DAP-3666 Quick Installation Guide
1
ENGLISH
• Internet Explorer 11, Safari 7, Firefox 28,
or Google Chrome 33 and above (for
configuration)
Hardware Overview
LED Indicators
LAN2
LAN1(PoE)
Figure 1: Front Panel LED
# LED Description
1
Power/
Status
Green (Solid)
- Device operational
Red (Flashing)
- Device booting
up/Device malfunctioned
Red (Solid)
- Device boot up
has failed
Table 1: LED Description
Interface Connectors
LAN2
LAN1(PoE)
Figure 2: Bottom Connectors
# Connector Description
1 Mounting
Lock
Connector for the mount screw.
2 Reset
Press and hold for 10 seconds to
factory reset the device.
3 LAN2 Port
Gigabit RJ-45 port for data.
Before You Begin
This installation guide provides instructions
for installing the DAP-3666 on your network.
Additional documentation is also available on
the D-Link support website.
• Nuclias Connect Manual:
For additional
information and instructions on how
to configure the device using Nuclias
Connect.
• DAP-3666 User Manual:
For additional
information and instructions on how to
configure the device using the web user
interface.
Package Contents
This DAP-3666 package includes the following
items:
• DAP-3666 Access Point
• Mounting Plate and Hardware
• Grounding Wire
• Quick Start Guide
• Mounting kit (Wall/Pole Mount)
- Stainless steel mount base x 1
- Stainless tie back straps x 2
- Wall screw x 4
- Wall plug x4
- Stainless mount screw (hexagonal hole) x1
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
Note:
To power the unit, use an 802.3af or
802.3at PoE Switch or PoE Injector.
System Requirements
• Computers with Windows®, Macintosh®,
or Linux-based operating systems with an
installed Ethernet Adapter
1
1 2 3 4