14
Using the Configuration Utility (continued)
Authentication:
Keys 1-4:
Select the default key.
Key Length:
IP Settings:
Choose one of the following modes:
Open Authentication – the DWL-G122
is visible to all devices on the network.
Shared Authentication – allows
communication only with other devices
with identical WEP settings.
Auto – will automatically adjust to the
Authentication mode of the wireless
access point or router.
Select the key length and either ASCII (e.g., a word) or hexadecimal format.
Click Apply to save changes.
When you click IP Settings in the Configuration window, the pop-up screen
above will appear. Configure the IP Settings in this window.
Hexadecimal digits consist of the numbers 0-9 and the letters A-F.
ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127.
IEEE802.1X:
Select Enabled or Disabled.
Authentication Config:
When you enable IEEE802.1X you will click Authentication Config. The
Advanced Security Settings screen will appear.
IP Settings
