D-Link 5000 Series, Справочное руководство CLI

Страница: 15 / 1263

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
9
Symbol Example Description
element.
Common Parameter Values
The values for parameters might be names (strings) or numbers. Enclose the name value in double
quotes in order to use spaces as part of a name parameter. For example, using the expression “System
Name with Spaces” requires the system to accept the spaces, while the use of empty strings (“”) is not
valid for user-defined strings. Table 2 explains common parameter values and value formatting.
Table 2: Parameter Descriptions
Parameter Description
ipaddr This parameter constitutes a valid lP address. The IP address can be entered
in the following formats:
a (32 bits)
a.b (8.24 bits)
a.b.c (8.8.16 bits)
a.b.c.d (8.8.8.8)
Besides these formats, the CLI also accepts decimal, hexadecimal, and octal
formats in the following input formats (where
n consists of any valid
hexadecimal, octal, or decimal number):
0xn (CLI assumes hexadecimal format.)
0x (CLI assumes octal format with leading zeros.)
n (CLI assumes decimal format.)
Interface or
slot/port
Used to indicate a valid slot and port number separated by a forward slash.
For example, 0/1 denotes slot number 0 and port number 1.
Logical Interface Indicates a logical slot and port number. This applies in the case of a port-
channel (LAG). The logical slot/port can be used to configure the port-channel.
Character strings Double quotation marks are used to identify character strings, e.g., “System
Name with Spaces”. An empty string (“”) will not be considered valid.
Slot/Port Naming Convention
In referencing physical entities such as cards and ports, the D-LINK OS software uses a slot/port naming
convention. This convention is also used by the software to identify certain logical entities, such as Port-
Channel interfaces.
There are two uses for the slot number. With respect to physical ports, it indicates the card containing the
ports. With respect to logical and CPU ports, it also indicates the type of interface or port.
Table 3: Types of Slot Numbers
Slot Type Description
Physical slot numbers Physical slot numbers start with zero, and are assinged up to the maximum
number of physical slots.