background image

 

TITLE 

OPERATOR MANUAL 

PAGE 

PRINTERS 

TELEIOS GRANDE H6 

61 

VERSION 

2017JAN23/1 

OUT OF 

REVISED BY 

MUNOZ, ANTONIO 

[email protected] 

64 

 

FOR THE USER 

d·gen International, Inc. - COMPANY PRIVATE (LEVEL 1) 

NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS 

DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN

 

 

PRINT LOOKS LIKE THIS? 

REASON 

Darker colors between passes. 
The printer is feeding less distance than it should. 

 

ACTION 

Check the feeding compensation at 2 passes (in case 
running with a 2-pass profile). 
While printing, try to increase the feeding compensation 
value (in steps of 0.1) in the touch panel until getting no 
space between passes. 

PRINT LOOKS LIKE THIS? 

REASON 

Darker and lighter colors between passes. 
Inconsistent feeding. 

 

ACTION 

Check the pneumatic silver bars are inflated. 
Check the tension is correct in the media. 
Check the weights setting is correct in the dancing bars. 
Check the speed at the take up and feeding units are similar 
and equilibrated (not too fast or too slow). 
Perform a feeding motion K value calibration. 
Check correct tension in the Y feeding timing belts. 
Check no feeding pulley lost traction from the shaft. 
Using optimization may resolve the issue. 

PRINT LOOKS LIKE THIS? 

REASON 

Some passes are lighter than others. 
Chromatic banding (soccer filed effect). 
Bi-directional alignment may be incorrectly done. 

 

ACTION 

Chromatic banding (soccer filed effect). 
Check if using unidirectional printing the issue disappears. 
Check the bi-directional alignment is correctly done. 
Perform a scan motion K value calibration. 
Make sure the room temperature is cooled. 
Make sure the ink temperature is cooled. 
Check the temperature and humidity values are in the 
operating range.   
See “notes when using the printer” in chapter 2. 
Make sure the ink is not older than one year. 
Make sure to have loaded the correct waveforms. 
May be ink issue. Report us by sending the ink’s batch/lot 
number. 
Check you are using d·gen genuine inks. 
Using optimization may resolve the issue. 

 

 

 

 

 

 

Содержание TELEIOS GRANDE H6

































































Отзывы: