d.gen TELEIOS GRANDE G5, Руководство по обслуживанию

Страница: 6 / 14

TITLE MAINTENANCE GUIDE PAGE
PRINTERS TELEIOS GRANDE G5 6
VERSION 2017DEC04 OUT OF
REVISED BY MUNOZ, ANTONIO support@dgen.com 14
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
Once a month
Machine’s interior
It is strongly recommended to do some cleaning
in the machine’s interior since the dust and the ink
mist airborne in the environment can seriously
damage the printer’s internal devices such as
electric components, electronic boards, etc.
Switch off and unplug the machine from the power
source before cleaning the machine’s interior.
Risk of electric shock.
Encoder strip
Clean the encoder strip using a wet cloth with
distilled water.
Careful not to scratch the encoder strip.
Do not use alcohol for this operation.
Limit sensors
We recommend checking if some dust or ink mist
is deposited where the diode emitter and receiver
is.
Poorly maintained limit sensors can cause the
machine to behave erratically. Therefore, we
recommend cleaning these sensors with
compressed air once a month.
Capping unit (deep cleaning)
It is important to seal the print heads with a clean
and wet capping unit to preserve the heads
longer.
We recommend cleaning the capping unit deeply
to remove all the undesired waste ink. Once is
fully cleaned, then fill the bucket with clean water.