Garage Door Opener
7
© 2015 DoorZone®
PROGRAMMING THE OPENER
IMPORTANT
Before programming the garage door opener, ensure that the door will open
and close easily and smoothly using manual operation. Use the Manual Release
Mechanism string handle to disengage the opener from the door, this will allow you
to operate the door manually/by hand while holding the rope.
If the door does not operate easily and smoothly on manual, it is important to call a professional door
technician to inspect and make the necessary adjustments to the door.
LEAVE THE GARAGE DOOR ON MANUAL OPERATION UNTIL THE DOOR HAS BEEN PROPERLY ADJUSTED.
Preparation
Re-engage the door by releasing your hold on the Rope Handle. Run the door on automatic mode or
move the door by hand until the Release Mechanism latches to the Traveller.
Ensure the door is in the closed position prior to programming.
Read all the instructions on programming before commencing.
Programming Buttons and LED’s
Programming Button
•Initiates programming mode and saves the settings.
Up/Open Button
•Opens the door
•Increase (+) Setting in programming mode
Down/Close Button
•Closes the door
•Decrease (-) Setting in programming mode
Save Button for Remote Transmitters
•Saves the
Remote Transmitter coding to the opener
•Deletes Remote Transmitter coding to the opener