D600
DSG045
Figure 1
5
Bolt
Step 3
Fit
Rear Mounting Square Tube Assembly (14)
to trailer chassis using the
two square U bolt
(15)
M12(140T) x 41(W) x 270(L)
and
Lower Mounting Plate (16)
. Make sure that a Rear
Mounting square Tube assembly position is at equal distance from front, so that at both side
of the Boat chassis, Stone guard will remain symmetric.
Warning:- Ensure any cables running along or under the chassis are not interred with
Keep appropriate and same gap on left- and right-hand side of chassis to
keep minimum 100mm gap between Gunnel and
upper Rear end of the Stone Guard.
14
16
15
