background image

2

D-fend™ SA300 User Manual

Compliance

Please note there is a shock hazard and there are no serviceable parts inside this device.  D-fend is FCC Class A certified, 
CE certified, and RoHs/WEEE compliant.  Please read the manual before using this product.

Warranty Information

The Eminence/D-fend Technology warranty remains in effect for one year from the date of the first consumer purchase (in 
the USA) with the original bill of sale.  Without an original bill of sale, the manufacturing date will establish the beginning of 
the warranty period.
 
Your warranty covers all defects in material and workmanship except: damage caused by accident, misuse, abuse, product 
modification or neglect, damage incurred during shipment, claims based upon any misrepresentation by the seller, or any 
Eminence/D-fend Technology product on which the date code/serial number has been defaced, modified or removed.
 
Eminence will pay all labor and material expenses for all repairs covered by this warranty.  Please be sure to save the 
original shipping cartons. A charge will be made if replacement cartons are requested.  You are responsible for transporting 
your product for repair or arranging for its transportation and for payment of any initial shipping charges.  We will pay the 
return shipping charges if repairs are covered by the warranty.

Eminence’s liability is limited to the repair or replacement, at our option, of any defective product and shall not include 
incidental or consequential damage of any kind.

This warranty gives you specific legal rights.  You may also have other rights which vary from state to state.
 
If your Eminence/D-fend Technology product ever needs service, contact us at 

Eminence Speaker LLC
P. O. Box 360 
838 Mulberry Pike
Eminence, KY  40019
502.845.5622 phone
502.845.5653 fax, 
[email protected] (for warranty purposes only)
[email protected] (for general inquiries)

Or you may contact the distributor or dealer where you purchased the product.  Please do not ship your product to the 
Eminence factory without prior authorization.
 
Use the email address, [email protected] for warranty issues only.  For all non-warranty issues, please contact 
Eminence at [email protected].

Содержание SA300





























Отзывы: