4
P1+
DOSING
PUMP
www
.theaquariumsolution.
com
CONNECT THE DOSING PUMP TO THE CLOUD
Make sure your mobile device is connected to your home network and that the
Kamoer Remote app permissions are set correctly on your mobile device (app
location services must be switched on).
Please note this device does not support 5G Wi-Fi and cannot use
a 5G Wi-Fi hotspot.
Connect the power supply to the DC 12v socket on the back of the dosing pump
and plug in to a mains power source.
After the dosing pump is turned on for the first time, the red status indicator light will
be illuminated. At this point you will need to use the Kamoer Remote app to connect
the dosing pump to the cloud through a wireless router.
Open the Kamoer Remote app, click the ‘
+
’ button in the upper right corner of the
device to add the device.
Under the D-D H2Ocean heading select your model of dosing pump.
The app will automatically search for your doing pump using Bluetooth and show any
available pumps, once displayed select your pump. Choose the WiFi network that you
would like to connect the pump to and carefully enter the password for that network,
once done select ‘
Next
’ and the connection process will automatically start.
When complete the app will display that the connection is successful, tap
‘
Start to use
’ to finish the process.
From this stage you can now access and control the pump and make any changes
including renaming the device.
For detailed setup manual visit the product page on our website
www.theaquariumsolution.com.
