D-D The Aquarium Solution Kamoer FX-STP WIFI, Руководство пользователя

Страница: 4 / 13

3
Version 1.0
Product Layout
1.LCD Display
2.Controll Dial
3. Pump head adjustment screw
4. Inlet
5. Outlet
Installation
Positioning the pump
The FX-STP is a self-priming pump so can sit above or below the water level in the aquarium or sump.
To avoid excess pressure on the pump head the tubing should be kept as short as possible.
Please carefully check that the inlet and outlet tube connections are correct on the pump head and
that the hoses are pushed fully onto connections before installation.
The pump head adjustment screw should never be over tightened, this will cause excessive wear on
moving components. Only tighten enough to ensure a reliable pinch on the Pharmed hose.
The pump should be secured into place or installed in a stable location not above open water, in areas
prone to splashing or in very humid environments.
1. LCD Display
2. Inlet tube 3.2 x 6.4mm
3. Outlet tube 6.4 x 9.6mm
4. Tube connector
5. Outlet tube 3.2 x 6.4mm
6. Power connection
7. Control Dial
w
w
w
.th
ea
qu
ari
um
so
lu
tio
n.c
om