D-CUT LX-200, Руководство по эксплуатации

Страница: 5 / 9

5
Carry
Hook the chain to the ring on
the handle and carry the
cutter as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Changing the Blade
Use the provided Allan wrench
to remove the six screws, then
hold the blade by each end and
carefully move the blade out of
blade holder.
Note:
the flat side of the blade
facing the table.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
MAINTENANCE MAINTENANCE