Step 4:
1. Pass the pulse wire (41) from the hole of handlebar post (4) and out of the hole of the computer
bracket.
2. Lock the handlebar (5) on the handlebar post (4) with T-Handle knob (42) Protective guard (43)
Protective guard (25a) and Flat washer
(44).
Step 5:
1. Connect the pulse wire(41) and sensor wire(22) with the cables of the computer(35),then lock
the computer(35) on the bracket of the handlebar post(4) with Cross head screws(37).
2. Lock the protective guard(25a/b) to the handlebar post(4) with Cross head screws (24).