D-Boss LT-40FLP, Руководство по обслуживанию

Страница: 65 / 103

SERVICE MANUAL
PAGE:
65
ADJUSTMENT INSTRUCTION
WITH DEFAULT FACTORY DATA
1.SVC mode data Adjustment
NOTE!! When the EEPROM has been replaced, the SVC data should be restored as the
function of individual system and specification.
[ Enter and exit SVC mode ]
Note: into the SVC mode, Initialize with default data.
1) Press 5 Seconds MENU buttons on both TV set and Remote Controller at the same
time to get into SVC mode.
2) Press the Yellow button several times to find SVC Data.
3) Input the corresponding SVC data referring to Table below with the Volume Up/down
key.
4) Press the OK button to memorize the data.
5) Press TV/AV button to exit SVC mode
2-1. Factory outgoing setting & Initialize with default data (into the SVC mode).
PAGE ITEM
Factory
outgoing
setting
Initialize
with default
data Ex
REMARK
AGC
15 15
Variable Data(0-31)
RD
127 127
PC Contrast Coefficient-RED(0-255)
GD 127 127
PC Contrast Coefficient-GREEN(0-255)
BD
127 127
PC Contrast Coefficient-BLUE(0-255)
RO
79 79
PC Brightness Coefficient-RED(0-63)
GO
79 79
PC Brightness Coefficient-GREEN(0-63)
BO 79 79
PC Brightness Coefficient-BLUE(0-63)
PC CP
5 5
PC Charge Pump(0-7)
DATA 1
50 PR * 1 * means current program NO.
DCI
0 0
Variable Data(0-1)
DATA0
255 255 Variable Data(0-255)
DATA1
255 255 Variable Data(0-255)
DATA2 255 255 Variable Data(0-255)
DATA3
255 255 Variable Data(0-255)
DATA4
255 255 Variable Data(0-255)
DATA5
255 255 Variable Data(0-255)
DATA6
255 255
Variable Data(0-255)
DATA 2
DATA7
255 255 Variable Data(0-255)
FP
52 52
FM Prescaler (0-127)
NP 122 122 NICAM Prescaler (0-127)
SP
63 63
Scart Prescaler (0-127)
S1 VOL 44 44 Scart1 Prescaler (0-127)
S2 VOL
44 44
Scart2 Prescaler (0-127)
DATA 3
50 PR * 1 * means current program NO.