D.A.S. Variant 18A, Руководство пользователя

Страница: 15 / 26

4.4 ASSEMBLING A SYSTEM WITH
FLOWN SUBWOOFERS
The VARIANT 18A units feature integral
rigging hardware allowing them to be flown
independently or above VARIANT 25A enclosures.
The first step will be to mechanically
connect the first VARIANT 18A to the AX-V25 grid. 6
safety pins are included in the rear side of the box in
order to do so. First rotate the rear side connecting
links by 180º, and then the front side connecting links
until the VARIANT 18A AX-V25 labeled position has
been reached. After that, insert the pin through the
hole labelled VARIANT 18A AX-V25(2).
To secure the enclosure to the grid (3) two
more safety pins are needed on each side. Check that
the position of the connecting links are as shown in
the image below.
3
3
The next step will be to hang one more
VARIANT 18A unit below the first one. To do so first
both connecting links will be rotated (4), then a safety
pin will be inserted into the hole labeled VARIANT 18A
(5) on the front side connecting link, and finally both
connecting links will be introduced into the rigging
hardware of the box above and secured by means of
two more safety pins (6).
0º
5º
-5º
0º
V
ARIANT
25
V
ARIANT
18
AX-V25
0º
5º
-5º
0º
V
ARIANT
25
V
ARIANT
18
AX-V25
1
2
1
4
5
6
4
If VARIANT 25A units are to be hung from
the VARIANT 18A subwoofers, first the connecting
links have to be rotated (7), then the safety pin must
be inserted into the hole that provides the desired
angle (8), and finally the connecting links have to be
introduced into the rigging hardware of the box above
and be secured by means of a safety pin on each side
(9).
9
7
8
36
6
Variant series Manual del usuario/
User´s manual