To facilitate the correct positioning of the guides in the corresponding angle hole of the upper unit (using
the quick release safety pins), a sticker indicates the splay angle obtained whether stacked or flown. To
secure the guides in the angle holes, 8 mm high resistance quick release safety pins are used (6 pins per
unit).
To fly the systems and define the splay angles, the pin should be inserted in the slot of the rear guide. To
stack the systems, the pin should be inserted in the hole of each guide.
In most cases, to join one box to another the procedure described above will suffice. We will proceed to
describe other accessories available for safe and simple stacking, transport and flying of the systems.
AX-AERO50
This accessory can be used with aero-50, also. This rigging structure is comprised of a steel central bar
and two detachable side panels that are fixed using high resistance quick release safety pins.
They have a centrally located reinforcement which is used to attach the lifting cables. Depending on the
position of the safety pins, the array will achieve a different angle of inclination (see the positions marked on
the side panels).
The first box will be attached to this structure using 6 safety pins according to the procedure described
on the preceding pages. Once this is accomplished, the structure can be left with a vertical orientation taking
into account the position of the safety pin. With the use of the EASE Focus simulation program, determine
what position should be used to achieve the desired array inclination.
Peso: 51 Kg
Weight: 112.2 lbs
Dimensiones (Al x An x P): 430 x 1440 x 721 (mm)
Dimensions (H x W x D): 16.9 x 56.7 x 28.4 (in)
W.L.L.: 1700 kgf
10
AX-AE50
Etiqueta de los herrajes de
LX-218C-R
LX-218C-R
rigging hardware label
0º
2º
4º
ær
o
/
AX-
combo
0º
0º
LX
STACK
FLY
USE ONLY 1
SAFETY PIN
CAUTION!
W.L.L. 1700Kg
0º
2º
4º
æro
/ AX-
combo
0º
0º
LX
STACK
FLY
USE ONLY 1
SAFETY PIN
CAUTION!
W.L.L. 1700Kg
Manual del Usuario
/ LX series /
User’s Manual
