4
Three or four units groups are easy to transport
by truck as we will see in this section. We will also
see the preparation.
Remove the front
PL-40
pushing the triggers at
the same time.
Hold the carriage before acting
on the triggers
. The triggers are situated on both
sides of the enclosure.
This will be the first enclosure that we will stack
onto the
PL-40S
.
If we look at the platform we will see the two
security pins on the sides (see figure).
These pins allow to hold the first enclosure to
the platform.
PL-40S
Side view of the
PL-40S
platform.
Front part of the
PL-40S
platform.
Rear part of the
PL-40S
platform.
Security pins on
the
PL-40S
platform side.
Security pins of the
PL-40S
platform.
Front view of the
PL-40S
platform.
4 UNITS MOUNTING ON A
PL-40S
Manual de Colgado
/ aero series /
Rigging Manual
