AMPLIFIER
Description
The amplifier is common for both models.
1
)
INPUT
:
XLR-type input signal connector. This is balanced connector just like the LOOP THRU connector with the
following pin assignments:
1 =GND (ground).
2 =(+) Non inverted input.
3 =(-) Inverted input.
2
)
LOOP THRU
:
XLR-type output connector for connecting several units together and sending them all the same signal.
3
)
IN
:
TM
Neutrik etherCon input connector for
DASnet
.
4
)
OUT
:
TM
Neutrik etherCon output connector for
DASnet
, for connect more cabinets.
5
)
ON/PROTECT
:
Two color LED which indicates that the unit is ON if shines green and protection if shines orange.
6
)
IDENTIFY/COMMS LED
:
Green LED which blinks slowly when IDENTIFY is pushed (to indentify the unit) or, blink faster if there is
TM
communication with
DASnet
.
7
)
SIGNAL/LIMIT
:
Two color LED which indicates signal presence if shines green and limiter if shines red.
8
)
IDENTIFY KNOB
:
It is used to indentify a unit in the software.
9
)
“THROW” SELECTOR
:
A button that allows selecting the throw preset in the rear panel.
10
)
“THROW” LED
:
The LED that shines indicates the selected preset.
11
)
“NUMBER OF UNITS” SELECTOR:
A button that switches between all the different pre configured array compensations (depending on the
number of cabinets)
12) “NUMBER OF UNITS” LED:
The LED shining indicates the selected preset.
13
)
QR
:
QR symbol which allows the access, by internet, to the user´s manual.
14
)
ID DASNET
:
TM
Tag with the ID number of the unit for
DASnet
(more information in SYSTEM RECONFIGURATION).
15
)
AC INPUT
:
Neutrik PowerCon TRUE1 mains connector.
Only use this equipment with an appropriate mains
cord.
16
)
AC OUTPUT
:
Neutrik PowerCon TRUE1 mains connector.
Only use this equipment with an appropriate mains
cord.
17
)
HEAT SINK
:
Be careful when in contact with the radiator because it can be hot, although it never will reach a
dangerously high temperature.
10
NUMBER OF UNITS
UNIT NAME
STAGE / VENUE
THROW
100-230 V~ 50/60Hz 420W
AC INPUT
MAX. 7@230V / 3@115V UNITS AERO 20A
AC OUTPUT
ID DASNET
14
17
15
16
7
5
1
6
8
2
3
4
9
10
13
11
12
Manual del Usuario
/ aero series /
User’s Manual
