Product User’s Manual -
HAT-MAKER
To run it, click Run - Run Module (or can press F5). You need to save your python code first.
You can save your code in Documents folder. Write MakerpHATDemo.py and save. Python
Shell window will popup. Wait until you hear a beep from Maker pHAT.
Now you can control the LED by pressing the push buttons.
●
SW1: Buzzer will produce double beep. LED will running from right (GPIO 19) to left
(GPIO17).
●
SW2: Buzzer will produce double beep. LED will running from left (GPIO 17) to right
(GPIO19).
●
SW3: Buzzer will produce single beep. LED stop running.
●
Hold SW2 and SW3: Raspberry Pi shutdown.
Created by
Cytron Technologies Sdn Bhd
– All Rights Reserved
Back to
