Product User’s Manual –
4.0 BOARD LAYOUT
1.
Stackable Digital I/O Headers
JP4 and JP6 are Digital I/O pins stacked to the Arduino main board.
2.
Optional External Control
External control is for the use of other types of microcontroller besides Arduino.
3.
Test Button B
When this button is pressed, current flows from output B to A and motor will turn CCW
(or CW depending on the connection).
4.
Test Button A
When this button is pressed, current flows from output A to B and motor will turn CW (or
CCW depending on the connection).
5.
Stackable Analog Input Header
This is the analog port of the Arduino and is not used by SHIELD-MD10. The stackable
header allows other stacked shield to utilize these pins.
6.
Stackable Power Pins Header
This is the power port of the Arduino. Only RST and GND pins are connected to the
SHIELD-MD10. The stackable header allows other stacked shield to utilize these pins.
Created by Cytron Technologies Sdn. Bhd. – All Right Reserved
7
