cytiva AKTA go, Руководство по эксплуатации

Страница: 82 / 130

Step Action
1 Pull back the filter holder handle (1) and place the edge of the filter against
the inside of the handle.
2 Lower the opposite edge of the filter so that it lies flat in the filter holder
under the two notches (1).
3 Release the handle so that it returns to its original position. The custom filter
is now ready for use.
Filter storage
The ImageQuant 800 can store one custom filter internally. To access and store a
custom filter, use the procedure below.
5 Operation
5.2 Prepare the instrument
82 Amersham ImageQuant 800 Operating Instructions 29372604 AC