cytiva AKTA go, Руководство по эксплуатации

Страница: 113 / 130

8.2 Recycling information
Introduction
This section contains information about the decommissioning of the product.
CAUTION
Always use appropriate personal protective equipment when
decommissioning the equipment.
Decontamination
The product must be decontaminated before decommissioning. All local regulations
must be followed with regard to scrapping of the equipment.
Disposal of the product
When taking the product out of service, the different materials must be separated and
recycled according to national and local environmental regulations.
Disposal of electrical components
Waste electrical and electronic equipment must not be disposed of as unsorted munic-
ipal waste and must be collected separately. Please contact an authorized representa-
tive of the manufacturer for information concerning the decommissioning of the
equipment.
Disposal of batteries
Waste batteries and accumulators must not be disposed of as unsorted municipal
waste and must be collected separately. Follow applicable local regulations for recy-
cling of batteries and accumulators.
Instructions for disposal
Follow the instructions below for disposal of the Amersham ImageQuant 800:
Step Action
1 Separate all electronic components (terminal strips, power supplies, trans-
mitters, pumps, probes / sensors, etc.) from the system cabinet.
8 Reference information
8.2 Recycling information
Amersham ImageQuant 800 Operating Instructions 29372604 AC 113