y
JP8 – IR receiver. Shunted (default) to enable IR
receiving. Open to disable the IR receiver.
y
SW1 – set according to the ID of the keypad
ID Settings (SW1)
Comfort is able to support up to 8 keypads
(KP03/KP04/KP05/KT03) in any combination. SW1 is a
set of 4 headers which is used to determine the ID
according to the table below:
Short
Open
Open
Open
8
Short
Open
Open
Short
7
Short
Open
Short
Open
6
Short
Open
Short
Short
5
Short
Short
Open
Open
4
Short
Short
Open
Short
3
Short
Short
Short
Open
2
Short
Short
Short
Short
1
SW1-D
SW1-C
SW1-B
SW1-A
ID
In Comfigurator, the number of keypads must be set to
the same as the maximum number of keypads
LED Indications
New message from phone. Press # to hear who
Blinking
New Internal message. Press # to hear who the
message is for. Sign in with user code to hear
the message
Steady
Msg (Green)
Standby battery voltage is low due to prolonged
power failure.Battery may need to be replaced.
Blinking
Mains Power failure.
Steady
AC (Red)
Alarm / Alert
condition
.
Blinking
System armed, No alarm) security mode
(Away, Night, Day, Vacation) is displayed
Steady
Arm (Red)
Trouble e.g. Phone line cut, RS485 comms
failure. Trouble Condition is displayed
Blinking
Security Off, all conditions Normal (no trouble)
Steady
Off (Green)
