Cyrus Stream Xa, Инструкция пользователя

Страница: 12 / 25

Stream Xa User Instructions
10
MC-BUS System
Connecting the MC-BuS sockets in an MC-BuS system
provides unified system control. An MC-BuS loop is
established by connecting single phono cables from the MC-
bus output of one unit to the Mc-bus input of another in
a daisy-chain. Complete the loop by returning the MC-BuS
output of the final component to the MC-BuS input of the
first.
If the
Stream Xa
is connected as a source of an amplifier, its
MC-BuS response can be set so that the system amplifier
will switch the Stream Xa to and from Standby.
external Power Supply - PSX-R/PSX-R
2
The PSX-R is a unique dc power supply that will upgrade
the sonic performance of compatible products in the Cyrus
range. The PSX-R
2
is a performance upgraded version of
the PSX-R . Both of these power supplies are compatible for
connection to the Stream Xa
.
The following text refers to the use of the PSX-R , but applies
also to the PSX-R
2
.
To connect a
PSX-R
, disconnect both components from the
mains, then plug the connector on the umbilical cord of the
PSX-R into the Multi-pole socket on the back panel. You will
need a mains supply for both units.
Note: Connection of a
PSX-R is detected automatically, so
no internal adjustments are required.
How it works
When a PSX-R is connected to a cyrus product, the power
feeds to the internal circuitry are split two ways with the
clean, stable power source of the PSX-R feeding sensitive
circuit sections while other requirements are supplied
internally. this ensures complete isolation of control circuits
and sensitive analogue sections reducing AC mains-borne
noise and power supply ripple.
Connecting to the AC Mains Supply
Connect the socket on the AC power cable to the power
inlet on the rear panel of the unit. Now connect the cable to
a suitable AC power point.
Cyrus CD player
Cyrus Stream Xa
Cyrus Amplifier
MC-BUS out
MC-BUS out
MC-BUS out
MC-BUS in
MC-BUS in
MC-BUS in