Cyrus DAC XP Signature, Инструкция пользователя

Страница: 17 / 21

Cyrus DAC XP Signature User Instructions
15
SETTING UP
There are many configuration options available in the setup
menu to customise the DAC XP Signature to best match
each individual system.
To enter the menu system, press the front panel SETUP key
f
. Turn the Rotary control
e
to scroll through the options
available on the display. Press the Rotary control
e
to select
the option displayed. During the setup sequence, you can
move to the next or previous step by pressing the Input up
or down buttons.
Press the seTuP
f
key to exit setup and save any changed
settings. Note that the setup sequence will exit, saving
any changed settings after 10 seconds of inactivity or after
the last option ‘Set the sensitivity for input 8’ has been
completed.
The setup menu options are shown here –
Phase adjust
Normal
Phase
This menu option sets the audio phase for the DAC. The
factory setting is normal. Some listeners may prefer the
inverted setting with their systems or for when playing
particular recordings.
Filter adjust
Fast Roll-off
Digital Filter Response
This menu option gives two settings for the digital filtering
of the DAC stage. Choose your preference of Fast or Slow
roll-off by auditioning some of your favourite tracks with
each setting.
Display mode
Small Input Names
Display Mode
There are three modes of display operation.
The ‘small input’ setting will show a three line display with
the volume reading at the top of the display, the selected
input in the display centre and the current sample rate/lock
status at the bottom.
The ‘large input’ setting will show a two line display with the
volume reading at the top and a larger input legend below.
The ‘large volume’ setting will display large volume characters
at the bottom of the screen with the bargraph above.
Digital Filter
Display Mode
Name Input 1
Choose a name for input 1 from the name list
Choose a name for input 2 from the name list
Choose a name for input 3 from the name list
Choose a name for input 4 from the name list
Choose a name for input 5 from the name list
Choose a name for input 6 from the name list
Choose a name for input 7 from the name list
Choose a name for input 8 from the name list
Set the sensitivity for input 7
Set the sensitivity for input 8
Name Input 2
Name Input 3
Name Input 4
Name Input 5
Name Input 6
Name Input 7
Name Input 8
Trim Input 7
Trim input 8
Storing settings Save settings and exit setup
Phase adjust Select normal or inverted
Select fast or slow roll off
Select large input, small input or large volume
Setup