Cautions
S6SAP111A28SA1001 2ch DC/DC Converter Evaluation Board Operation Guide, Doc. No. 002-08726 Rev. *A
5
Damage
When turning the power on or off, follow the relevant procedure as described in this document.
Before turning the power on, in particular, be sure to finish making all the required connections.
Furthermore, be sure to configure and use the product by following the instructions given in this
document. Using the product incorrectly or inappropriately may cause a fault.
Damage
Always turn the power off before connecting or disconnecting any cables from the product. When
unplugging a cable, unplug the cable by holding the connector part without pulling on the cable
itself. Pulling the cable itself or bending it may expose or disconnect the cable core, resulting in a
fault.
Damage
Because the product has no casing, it is recommended that it be stored in the original packaging.
Transporting the product may cause a damage or fault. Therefore, keep the packaging materials
and use them when re-shipping the product.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
