CHAPTER 11:Port Configuration
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
221
Notes:
−
RIC_RESINn register is only used for a resource which supports relocation function or resource
input function from the other resource. The RIC_RESINn should be configured as above.
−
A resource which supports neither relocation nor the other resource input doesn’t have its
RIC_RESINn register. Configurations can be skipped in above procedure.
5.3.
Resource Output
Figure 5-3: Procedure of Resource Output
Notes:
−
The dedicated output control configuration as well as POF should be necessary for bellows.
−
SOUT(MFS),
−
SGA,SGO(SG)
−
WOT(RTC)
−
MFS_CS (MFS)
Start
Disable analog input
in case with analog function.
Configure a resource output signal
at PPC_PCFGRn.POF[2:0].
End
Содержание S6J3200 Series
