CHAPTER 28:LCD Controller
1036
S6J3200 Series Hardware Manual Document Number: 002-04852 Rev. *G
3.
Configuration
This section shows the configuration of the LCD controller.
Configuration Diagram of LCD Controller
Figure 3-1 shows the configuration diagram of the LCD controller.
Figure 3-1 Configuration Diagram
or
Pin function change with PFR and EPFR
Pin function change with PFR and EPFR
(See “CHAPTER 11 I/O PORTS ” )
or VCC
Main clock
Sub clock
FP1,0
LCR0: bit1, 0
Disconnect internal split resistance
Connect internal split resistance
0
0
0
0
1
1
1
1
VSEL
DTCH
LCEN
LCSEN
LCR0 : bit5
LCR0 : bit6
LCSR : bit6
LCDCMR : bit7
1/3 bias
1/2 bias
Stop display in RTC mode
Display in RTC mode
Stop display in RTC mode
Display in RTC mode
Display
No display
0
1
BK
LCR0 : bit4
LCRS : bit1, bit0
FPS1,0
(See "Registers")
Pin function change with COMVER
Pin function change with SEGER
Содержание S6J3200 Series
