PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide, Document Number. 002-22677 Rev. *I
29
Kit operation
Figure 2-6. TFT shield pinout
Notes:
The TFT display operation at 1.8 V is currently not supported in this version of the kit. Ensure that
the following conditions are met when the CY8CKIT-028-TFT display shield is mounted on the
PSoC™ 6 Wi-Fi Bluetooth
®
pioneer board.
1. Ensure that SW5 is either set to 3.3 V or set to the 1.8 V–3.3 V VARIABLE with
PSoC™ Programmer selecting a voltage of 2.5 V or higher.
2. If you want to erase the internal flash of the PSoC™ 6 MCU, ensure that the
PSoC™ Programmer setting is not 1.8 V when the SW5 is set to the
1.8 V–3.3 V VARIABLE position.
